1 3

Vanlifer 12 Way Fuse Block with Bus Bar

Vanlifer 12 Way Fuse Block with Bus Bar

SKU: EL058

$39.99
$39.99
Sale Sold out
GST included.

The backbone of a tidy campervan electrical system. This 12-way fuse block with integrated negative bus bar keeps all your 12V circuits protected, organised, and easy to diagnose — with red LED indicators that show blown fuses at a glance. We use these in our own Vanlifer workshop builds.

Benefits:
• 12 individually fused circuits covers a full van build — fridge, pump, lighting, USB, heater and more.
• Integrated negative bus bar eliminates a separate earth block and simplifies wiring.
• Red LED indicators show blown fuses instantly without a multimeter.
• Nickel-plated copper terminals resist corrosion in damp van environments.
• Dustproof clear cover keeps terminals protected.
• Compact enough to mount in a small cabinet or under a seat.

Features:
Each of the 12 circuits accepts a standard ATC/ATO blade fuse up to 30A. The common positive input handles 100A total from your battery or main fuse. All circuit negatives terminate on the integrated bus bar, which runs a single cable back to battery negative — no messy ground loops, no daisy-chaining earth wires. LED indicators light up when a fuse blows so you can pinpoint a fault instantly. Fuses not included — select the right rating for each circuit.

Pair with the 16-Way Busbar for earth distribution and the Midi Fuse Holder to protect your main cable run from the battery.

Specifications


• Max voltage 32 V DC, total input up to 100 A.

• Up to 30 A per output circuit.

• Main input terminal: M5 stud (Ni‑plated copper).

• Circuit outputs on M4 studs, handles 12‑16 AWG wire.

• Blown‑fuse LEDs for fault indication.

• Protective clear cover included.

• Dimensions approx. 138 × 85 × 37 mm.

• Weight ~250 g depending on model.

Downloads

Fuse panel manual

View full details

People are asking

How many circuits can I run from this fuse block?

The block has 12 individual fused circuits, each rated up to 30A with a standard blade fuse. The common positive input handles up to 100A total. A typical van build uses circuits for: fridge, water pump, lighting zones (2-3), USB charging, 12V sockets, diesel heater, and a spare or two — the 12-way covers most full builds without needing a second block.

Do I need a separate negative busbar?

No. This fuse block includes an integrated negative bus bar, which is one of its key advantages over cheaper blocks. All your circuit negatives terminate directly on the block's built-in bus bar, which then runs a single cable back to your battery negative. This keeps wiring tidy and eliminates messy ground loops.

What fuses does it use?

Standard ATC/ATO blade fuses, which are available from any auto parts store or online. Each circuit can take up to 30A. The block does not include fuses — you select the right amperage for each circuit you're wiring. Common sizes used in van builds are 5A (lighting), 10A (USB), 15A (fridge), and 20A (water pump).