• Blue hose with a textured pattern on a white background
1 1

Drinking Water Hose - Non Toxic

Drinking Water Hose - Non Toxic

SKU: PL070

$7.99
$7.99
Sale Sold out
GST included.

The right hose for campervan drinking water lines. This 12.5mm food-grade hose is non-toxic, UV-stabilised, and manufactured to drinking water standards — it won't affect the taste or smell of your water. Sold by the metre so you order exactly what your build needs, with no waste.

Benefits:
• Food-grade and non-toxic — safe for drinking water direct from tank to tap.
• Won't affect water taste or odour, even after extended storage.
• UV-stabilised to resist cracking and hardening in sun-exposed areas.
• Kink-resistant and flexible — easy to route through tight van cavities.
• 12.5mm (1/2") internal diameter — standard size for van and marine plumbing.
• Sold by the metre — order exactly what your build needs.

Features:
This hose works with standard barbed fittings, John Guest push-fit connectors, and most 12-13mm campervan plumbing components including the Seaflo pump outlets and JG fittings. A typical single-sink van build uses 3-6 metres; add more for a shower or hot water heater with separate hot and cold runs. Cut cleanly with a sharp knife — no special tools required.

Use with the Seaflo 12V Water Pump and Self Containment Plumbing Kit for a complete van water system.

Specifications

• Internal diameter: 12.5mm (1/2")
• Material: Food-grade non-toxic PVC
• UV stabilised: Yes
• Sold: Per metre
• Compatible fittings: Standard barbed, John Guest push-fit, 12-13mm
• Application: Drinking water tank-to-tap lines, caravan, marine

View full details

People are asking

Is this hose safe for drinking water?

Yes. This hose is manufactured from non-toxic food-grade materials that meet drinking water standards. It won't leach chemicals into your water or affect taste or smell — important when the hose connects directly to your drinking water tank. It's the same type used in marine, caravan, and campervan water systems throughout NZ and Australia.

What fittings does this hose connect to?

The hose has a 12.5mm (1/2 inch) internal diameter and connects to standard barbed hose fittings used across campervan and marine plumbing systems. It is compatible with John Guest push-fit fittings, barbed tee and elbow joiners, and most 12mm-13mm water system components including the Seaflo 12V pump fittings.

How much hose do I need for a full van plumbing setup?

A typical campervan with one sink and a shower uses around 3-6 metres of hose for the cold water runs. If you're adding a water heater with separate hot and cold lines, budget for 8-10 metres. Always measure your intended runs and add 20% for bends and routing. This hose is sold by the metre so you can order exactly what you need.